昆山Correct operation method of manual stacking car

Before using the manual stacker, check the state of the hydraulic cylinder to ensure that there is no oil leakage. Hold the control handle with both hands, forcing the vehicle to drive slowly to the working goods. Manual stacker can load goods after stopping, and it is not allowed to stop on ramps or potholes.

Manual stacking car

How to load and unload the goods by manual stacker: (1) When the fork is in a low position, keep it perpendicular to the shelf and approach the shelf carefully; (2) Lift the fork to the required height. Height, slowly move to the pallet to be unloaded, and ensure that the fork can easily enter the shelf, and the goods are in the safe position of the fork. (3) Lift the fork until the pallet is lifted from the shelf. (4) Slowly return in the aisle. (5) Slowly lower the goods, and ensure that the fork does not touch obstacles during the lowering process. Note: When the goods are lifted, the steering and braking operations must be slow and careful. Withdraw the manual stacker and remove the pallet fork hole.

How to stack the manual stacker: (1) Keep the goods low and carefully approach the shelf (2) Lift the goods to the top of the shelf (3) Move forward slowly, and stop when the goods are higher than the shelf. At this time, put down the pallet and pay attention not to exert force on the shelf below the goods to ensure that the goods are in a safe position (4) Return slowly and ensure that the pallet is in a safe and firm position (5) Lower the pallet to a position where the stacker can move.

Necessary safety measures for the use of manual stacker: (1) Do not be overweight or unbalanced when loading goods, and pay attention to the distance between load centers. (2) Don't drive on the ramp or stay on the ramp. (3) The goods in and out of the elevator are advanced, and the people are backward, so it is an order that people ship first and then get out. (4) Pay attention to the problem of a load ratio of the manual stacker. It is not allowed to drive under the condition of loading, so as to avoid the cargo center moving up and releasing and overturning.

Prohibitions for manual stacking of high trucks (1) It is forbidden to operate storage forklifts after drinking (2) It is forbidden to pile overloaded, uneven and flat goods (3) It is forbidden to ride over (4) It is forbidden to stop on ramps or steps.